When it comes to removing a dash cam and its adhesive from your windshield, it's essential to do it right. Typically, dash cams are installed on the windshield using a 3M tape adhesive. However, once it's time to remove your dash cam, the adhesive can seem stubborn and not easy to remove. But don't fret; you can remove the adhesive using a few simple methods.
One way to remove the adhesive from your windshield is by using a heat gun. This tool can be incredibly useful and efficient. The heat gun provides heat to the adhesive, which can loosen its grip on the windshield, making it much easier to remove. However, you must handle the heat gun with care to avoid any damage to the windshield. Be sure to set the heat gun on the lowest setting and hold it a few inches away from the adhesive for at least thirty seconds. This process will soften the adhesive, making it easy to remove.
Another effective solution to remove the 3M adhesive from your windshield is using Goo Gone Adhesive Remover. This product was designed explicitly for removing adhesive from various surfaces. It is environmentally friendly and safe to use on most surfaces, including glass, metal, plastic, and painted surfaces. All you need to do is spray the Goo Gone Adhesive Remover onto the adhesive and the surrounding area, let it sit for a few minutes, then take a razor blade scraper and remove the softened adhesive. Be sure to wear gloves when using Goo Gone Adhesive Remover and keep it away from pets and children.
If you find yourself in a situation where you don't have access to any specialized products or tools, you can also use a razor blade scraper to remove the adhesive. Before using the razor blade scraper, ensure the windshield is wet by spraying warm soapy water onto the adhesive. Then carefully run the razor blade over the adhesive, slowly and cautiously removing it without scratching or damaging the windshield.
Lastly, using isopropyl alcohol can be an effective way of removing dashcam adhesive from a windshield. Apply the alcohol on a microfiber towel and rub it onto the adhesive. Leave it there for about 30 seconds before taking the razor blade scraper and slowly scraping the adhesive, which should come off easily.
In conclusion, there are several ways to remove dashcam adhesive from your windshield. Using a heat gun, Goo Gone Adhesive Remover, a razor blade scraper, or isopropyl alcohol can all be efficient and effective methods. Whatever method you use, ensure you are careful not to damage your windshield and always follow the instructions carefully. By using these methods, you will successfully remove the adhesive and keep your windshield clean and clear.